WEBENCH-POWER-DESIGNER: Error in Webench

Hi May,

thank you for supporting the LM5176.

I just tried it on my PC and it worked. Maybe this was just a temporary web issue.

Can you please try again?

If you still see it can you provide the exact project settings you have used.

Best regards,

 Stefan

Hi Stefan,

Still encountering the same issue, cannot proceed with the customization/export. I have tried different web browser.

Thank you.

Regards,
May

Hi Maynard,

can you share your design. For this you can do this steps

• Click the 3 dots in the left top corner
• Share design
• public link
• get link
• copy

Then copy the link in here.

Thanks,

 Stefan

Hi Stefan,

Please see link provided by the customer below.

webench.ti.com/.../SDP.cgi

When I tried exporting the TINA-TI, I encountered the error "Export failed Submit error"

Thank you.

Regards,
May

Hi May,

with this configuration i can also reproduce this issue.

I will file this issue to the Webench team and let you know as soon as i get some feedback but this typically takes several days.

Best regards,

 Stefan

Hi Stefan,

Thank you and looking forward to your update.

Regards,
May

Hi Stefan,

Just want to know when will I you get a feedback regarding this issue?

Thank you.

Regards,
May

Hi May,

sorry for the delay in this topic. I just checked the ticket for Webench and it is still in work.

Keep you updated as soon is I get additional information.

Best regards,

 Stefan

Hi May,

We are looking into this issue. Currently, all TINA export is failing for all the devices on ti.com . Team is working to resolve this with high priority. We will keep you updated on the same.

Thanks & Regards,
Praveen

Hi May,

The export is failing when Dither mode is on ( Due to Cdith capacitor). We are working on this. We will let you know once it resolved.

Thanks & Regards,
Praveen

Hi Praveen,

Thank you for the update.

We are looking forward for your to resolve the issue.

Regards,
May