The TI E2E™ design support forums will undergo maintenance from Sept. 28 to Oct. 2. If you need design support during this time, contact your TI representative or open a new support request with our customer support center.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LMG3422R030: How significant is slew rate in affecting switching loss?

Part Number: LMG3422R030

Hi all!

According to section

How much will the switching loss change from 20V/ns to 150V/ns?

Thank you,


  • Hi Cameron, the exact numbers for switching loss when comparing multiple slew rates will vary depending on topology, but as a reference, the trend is very much linear. A slew rate of 20V/ns will have double the switching losses when compared to 40V/ns and so on. We have multiple power loss calculators on our website which allow you to change single parameters such as slew rate and see how they affect the switching loss of your topology, I have included one below for a CCM Boost PFC.

    Hope this helps,