Other Parts Discussed in Thread: UCC21750-Q1
In the datasheet of UCC21750-Q1, there is three SHORT CIRCUIT CLAMPING items. (VCLP_OUT(H), VCLP_OUT(L), VCLP_CLMPI) (Page.10)
I want to know the meaning of TEST CONDITION in these items.
For, VCLP_OUT(H), I understood it as when OUTPUT level is low and the 500mA current flows through OUT pin, after 10us the OUTPUT voltage minus VDD equals to 0.9V (typical).
Is it right? Becuase I'm not sure about the short clamping circuit, I'm not sure if I understood this operation well.