Hi sir,
We use TI USB BOX to monitor the current=3.3A(it's still show wrong value),but the power supply show 8.9A.
Do I need to set which register except (8Ch)READ_IOUT to get the correct current value?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi sir,
We use TI USB BOX to monitor the current=3.3A(it's still show wrong value),but the power supply show 8.9A.
Do I need to set which register except (8Ch)READ_IOUT to get the correct current value?
Hi Kevin,
May I know what the load current was when you read 3.3A from GUI?
Was the input power supply showing 8.9A? Could you explain your set up (Input voltage, VOUTA,VOUTB, load on VOUTA and load on VOUTB etc.)?
Share the screen shot of GUI showing 3.3A and also the configuration file if you have modified the default settings.
Hi sir,
Our software engineer has found the correct code and now it's no problem.