• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 62 subscribers
  • Views 159 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

UCC21750: Pspice model fail to run

Minghang Xie
Prodigy 175 points
Part Number: UCC21750

Hi guys,

I download the  UCC21750 PSpice Transient Model from TI.com (UCC21750 data sheet, product information and support | TI.com), and run it with Pspice for TI ver. 17.4-2022. The model fail to simulate and the error information is shown in the picture attached. I wonder how to fix this problem. 

I appreciate your help.

  • +1
    TI__Expert 3860 points

    Hi Minghang, 

    This is not an error message. If you're using imported models in PSpice for TI, as said in this pop up window, you'll be able to put down only between 1 to 3 markers to measure current, voltage, etc. We recommend you putting down these markers before running the simulation, then click "ok" when this pop up window appears. In that way you can view the simulation results. 

    Thanks, 

    Vivian

  • 0 in reply to Vivian Qi
    TI__Prodigy 175 points

    Hi Vivian,

    I have put down these markers and the simulation works. 

    Thanks and have a nice day!

    Best regards,

    Minghang