• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 66 subscribers
  • Views 223 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ34Z110: Chip Set up

Marvn Arcangel
Genius 12585 points
Part Number: BQ34Z110
Other Parts Discussed in Thread: BQ34Z100-G1, EV2400

Hi Team,

Is it possible to use Arduino to configure and set up the Registers/Data Flash of BQ34Z110 or this can only be done using bq34z110 Evaluation Software + EV2300 board?

I hope you can clarify.

Regards,

Marvin

  • 0
    TI__Guru** 105760 points

    Hello Marvin,

    I would recommend any new designs use the BQ34Z100-G1 instead of the BQ34Z110.

    For configuring impedance track gauges you will need at least one EV2400 module in order to program the proprietary chem ID data. After that you can use the flash stream files and your MCU to program the gauges.

    SLUA801 would be the best reference for this.

    Sincerely,

    Wyatt Keller