Hello TI support team
We are suffering an issue with the BQ25703A, we have a VBus at 20V but the ACOV fault is raised... Is there any possible reason for that ?
Thanks in advance
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello TI support team
We are suffering an issue with the BQ25703A, we have a VBus at 20V but the ACOV fault is raised... Is there any possible reason for that ?
Thanks in advance
Hi, Robin,
We need more information to look into this. For example, schematic and waveforms.
Regards,
Tiger
Hi Tiger,
We found the issue, we had a bad connection on the ACN and ACP pins. But... how ACN and ACP connections can affect the VBUS measurement ? it is not described as is in the datasheet.
Best regards
Glad to hear the issue was found. Without knowing the circuitry details, I could not comment on the failure mode.