This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS3779-Q1: could you provide failure mode for this part

Part Number: TPS3779-Q1
Other Parts Discussed in Thread: TPS38-Q1, TPS37-Q1

hello :

        i want to use this part to monitor power, this is functional safety project.

        So, could you provide failure mode, failure rate and so on. i want to calculate FMEDA.

        it`s very important for project.

thank you so much!

  • Hello,

    The requested info for the TPS3779-Q1 is not readily available unfortunately.

    Would you be willing to consider the TPS38-Q1 which is the next gen replacement of the TPS3779-Q1? All the functional safety info you are requesting is available on the link provided earlier (go to technical documentations tab for the Functional Safety docs). The TPS38-Q1 functions the same as TPS3779-Q1 so would highly recommend this part to consider.

    Hope this helps, else let us know if you have further questions or concerns.

    Thanks,

    Isa

  • hello. Thank you so much!

    i found a document in TPS38-Q1 page. it is "TPS37-Q1 and TPS38-Q1Functional Safety FIT Rate, FMD and Pin FMA", can i use it for TPS3779-Q1?

  • Hello,

    Unfortunately the Functional Safety Docs is only for TPS37-Q1 & TPS38-Q1 and does not apply to TPS3779-Q1.

    Thanks,

    Isa