This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ24610EVM: HPA422 rev. B

Part Number: BQ24610EVM
Other Parts Discussed in Thread: BQ24610


Good Day.

Customer had a technical problem with the BQ24610/616/617/630 EVM. The right name of the design is HPA422 REV. B

Would you clarify for us why at PIN 17 of the IC they used a WIRE? The WIRE here they used is to connect GND and GND2. But the solid fill has no net but has been physically used to join between the GND and GND2. May you clarify why they used that while at the schematic, there is no WIRE used to bridge between GND and GND2. (Image attached)

Please advise. Thank you very much.

Best Regards,

Ray Vincent