Hi team,
My customer is trying to simulate efficiency, thermal and BOM with following condition :
Vin = 12V - 20V
Vout = 15V
Iout = 5A
But we get an error that
Best regards,
Hardy
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi team,
My customer is trying to simulate efficiency, thermal and BOM with following condition :
Vin = 12V - 20V
Vout = 15V
Iout = 5A
But we get an error that OpVal table param temperature > 150°C. Could you please help to check about it? Thank you.
Best regards,
Hardy
Hi Hardy
We are looking into this. We will get to you with an update by end of this week.
Thanks and Regards
Shaheen
Hi Hardy,
We are still debugging this issue, We will get back to you once we have an update on this.
Regards,
Shaheen
Hi Hardy,
Sorry for delay in fixing this issue, It took us sometime to fix this issue, Updated WEBENCH model will be available on ti.com by next WEBENCH release(Tentatively by Mid of September).
Please find the WEBENCH design report for your reference.
/cfs-file/__key/communityserver-discussions-components-files/196/WBDesign8223-_2800_1_2900_.pdf
Regards
Shaheen S M