BQ24075T: BQ24075 vs BQ24075T

Igor Tabakov

Part Number: BQ24075T
Other Parts Discussed in Thread: BQ24075,

Hello Forum,

The only mention of BQ24075T in the specs is on page 6 where the difference between BQ24075 and BQ24075T is the method (voltage vs current) of monitoring the battery temperature.

Can it therefore be assumed that the parts are fully interchangeable and the difference is only internal?

Thank you.

over 2 years ago

0 Anthony P Pham over 2 years ago

TI__Mastermind 23220 points

Hi Igor,

Yes, the method of TS is the only difference. These are fully pin to pin compatible but it is important to adjust the TS portion of the schematic.

You can find some more inofmration here: [FAQ] BQ24072T: What are the differences between the BQ24072T and the BQ24072? - Power management forum - Power management - TI E2E support forums

Best Regards,

Anthony Pham

0 Igor Tabakov over 2 years ago in reply to Anthony P Pham

Prodigy 70 points

Hi Anthony,

My original question was, are these parts interchangeable. If BQ24075T requires 2 additional resistors to set a voltage divider for the temperature monitoring to work, than the answer is NO.

Thank you for your prompt reply and support.

Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

Power management

Power management forum

BQ24075T: BQ24075 vs BQ24075T