Hi Team,
Can CE pin be pulled down through resistor? customer want to use a 10kohm. In EVM,it is pulled down to Gnd directly.Is there requirement on pull down resistance ?
Thanks
BRs
Given
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Team,
Can CE pin be pulled down through resistor? customer want to use a 10kohm. In EVM,it is pulled down to Gnd directly.Is there requirement on pull down resistance ?
Thanks
BRs
Given
Given,
The /CE pin is a high impedance pin with an input low threshold of 0.4V. As long as the /CE pin pull-down resistor may keep the /CE pin below 0.4V, the /CE pin should work as desired.
Thanks,
Ning.