This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

WEBENCH-POWER-DESIGNER: LM25116 - Unable to simulate startup

Other Parts Discussed in Thread: LM25116


I'm unable to simulate my design on Power Designer. It is for the LM25116. I'm attaching the solid state report for reference and so you can see my values. I've also tried this at -40C and 40C and not been able to run startup either.

Thank you.

WBDesign6_Steady State-3.pdf