Hi,
May I know the current limit range for ILIM pin settings?
I would like to know the maximum RILIM/OCP could be used.
Thanks and Best regards,
Tiger
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
The adjustable range of the ILIM voltage is 0.1V to 1.2V. With the nominal Rdson of 0.58mΩ and a 16:1 divider, that corresponds to 75mV on the low-side FET or 129A, which would correspond to a 107kΩ ILIM resistor. I would not recommend programming the current limit that high. I would recommend a maximum Rilim of 75kΩ