• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 62 subscribers
  • Views 79 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

UCD9090-Q1: Could UCD9090 do margin high/low using PMBUS command?

Smith Chao
Prodigy 180 points
Part Number: UCD9090-Q1
Other Parts Discussed in Thread: UCD9090

Hi TI experts,

I just want to know how to do UCD9090 margin high/low after reset is high using PMBUS, and how to configure the setting in Fusion Digital Power Designer? If so could you help modify the tifsp file as per attached?

Attached is the schematic of UCD9090 from our customer, please help to check we could do margin high/low using PMBUS

c7_secondary_compute_schematics.pdf

thanks

Smith