This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

UCD9090-Q1: UCD9090-Q1 hardware element evaluation per ISO-26262

Part Number: UCD9090-Q1
Other Parts Discussed in Thread: UCD9090,

I am in the process of executing hardware element evaluation for UCD9090 as per ISO 26262 requirements.

I currently have document for UCD9090-Q1 which indicates few failure modes , distribution and FIT value at high level and there is no information on mitigation.

Can you help us with below for UCD9090,

 

  1. Detailed FMD(including effects of the failure modes identified in the attached sheet and possible mitigation plan)
  2. What development process was used for development of UCD9090. Any evidence of the development process that can be made available
  3. Do you have IATF 16949 certification. Can this be shared if available
  4. Do you have Verification Plan and Report for UCD9090. Can this be shared if available.
  5. Do you have AEC-Q100 report for UCD9090. Can this be shared if available.
  6. Do you have a Control Plan and Process Failure Mode Effect Analysis(PFMEA) for your manufacturing process. Can this be shared if available.
  7. Do you perform in-line testing for UCD9090. Can you share the in-line testing procedure if available.
  8. Do you perform end-of-line testing for UCD9090. Can you share the end-of-line testing procedure if available.

 

We need above information to support argument that the risk of systematic failures for UCD9090 is low which is required per ISO 26262.