This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LMR14006YEVM: LMR14006YDDCR fix in webench power designer?

Part Number: LMR14006YEVM

Trying to double check values for the LMR14006YDDCR in Webench Power Designer but keep getting a minimum on time error with high voltage.

Example:

9-36V in, 3.3V out at 0.1 A. 

>> Design update failed. Failed Minimum Ton MinOnTime of the device violated

This device should definitely support those values, but something is broken about the webench model for this device.