• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 62 subscribers
  • Views 111 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LMR14006YEVM: LMR14006YDDCR fix in webench power designer?

Kevin Baker
Prodigy 70 points
Part Number: LMR14006YEVM

Trying to double check values for the LMR14006YDDCR in Webench Power Designer but keep getting a minimum on time error with high voltage.

Example:

9-36V in, 3.3V out at 0.1 A. 

>> Design update failed. Failed Minimum Ton MinOnTime of the device violated

This device should definitely support those values, but something is broken about the webench model for this device.

 

  • 0
    TI__Mastermind 18940 points

    Hello Kevin, 

    According to the datasheet electrical characteristics table, it looks like the typical minimum on-time is 95ns.

    The maximum VIN in the design you are attempting is 36V, which at 3.3V output and 2MHz operation will demand lower on-time than the minimum.

    I would suggest lowering the maximum input voltage for your webench design (perhaps 16V max) in order to avoid minimum on-time limitation. 

    Regards, 

    Denislav

  • 0 in reply to Denislav Petkov
    Prodigy 70 points

    Ah I see. I guess I read Sleep Mode as some kind of discontinuous mode, but it may not be the same thing as real PFM. I will look for a different part for this application.