This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Ravi,
The chargers are essentially power supplies with complex state machines and analog feedback loops while the gauges are micro-controllers using ADCs and digital logic. The charger is unable to provide charging time calculation.
Thanks,
Ning.
Ravi,
1. It depends. Please refer to 8.2.6.1 Narrow VDC Architecture on the d/s. SYS_MIN is only adjustable via I2C.
2. Please refer to 7.5 POWER-PATH MANAGEMENT spec section on page 7.
Thanks,
Ning.