• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 62 subscribers
  • Views 72 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS25750: About AlwaysEnableSink

Hide
Guru 21045 points
Part Number: TPS25750
Other Parts Discussed in Thread: BQ25792, TIDA-050047

Hi Team,

 

We would like to design Sink mode only with EEPROM and change BQ25792 resister by pass through mode.

Currently, we are evaluating TIDA-050047 and I understand that TIDA-050047 setting “AlwaysEnableSink”.

https://e2e.ti.com/support/tools/simulation-hardware-system-design-tools-group/sim-hw-system-design/f/simulation-hardware-system-design-tools-forum/975838/tida-050047-tps25750/3606712?tisearch=e2e-sitesearch&keymatch=TPS25750%252520ADCIN#3606712

 

Which " AlwaysEnableSink " or " SafeMode " is better for our setup?

By the way, we guess that Appropriate is "AlwaysEnableSink".

 

Regards,

Hide