This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS54360B: Regarding External Resistor to EN Pin

Part Number: TPS54360B

Hello,

I am an FAE for a distributor that handles TI products.
I received the following question from my customer.

The datasheet shows the circuit below for the Undervoltage Lockout feature using the EN pin.
However, I made a mistake with another device I was designing and added a hysteresis resistor between the wiring between RUVLO1 and RUVLO2 and the EN pin(red square in the figure below).
(Question)
Is there any problem with such usage?
If there is no problem, are VSTART and VSTOP correct according to the following formula?

Best regards,