The TI E2E™ design support forums will undergo maintenance from July 11 to July 13. If you need design support during this time, open a new support request with our customer support center.

  • State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 63 subscribers
  • Views 120 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS544B25: Connecting TPS544B25 I2C signals to TPS650861

Erwin ANDRE
Prodigy 40 points
Part Number: TPS544B25

Hi, 

I'm working on a design that contains one TPS65086100 and one TPS544B25.

I'd like to know if it's possible to connect both devices on the same I2C bus with the pull-up connected to the LDO3P3 power supply from the TPS65086100. 

Is it dangerous for the TPS544B25 device ? Both devices are powered with the same input power supply. 

Erwin