• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 64 subscribers
  • Views 1165 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS40131 Single-Phase Application

Frank Wei
Prodigy 150 points
Other Parts Discussed in Thread: TPS40131, TPS40322, TPS40303

Hi,

Could TPS40131 use in single-phase application?

Thank you.

Frank

  • 0
    TI__Genius 17240 points

    Hi Frank,

    TPS40131 cannot be configured to single-phae application. It is suggested to use TPS40303 (single phase controller) or TPS40322 (dual-output/two-phase controller).

    Regards,

    Na

  • 0
    TI__Genius 17240 points

    Hi Frank,

    TPS40131 can be configured into single phase application by connecting CS1 and CS2 together, CSRT1 and CSRT2 together, to the same current sense signal and leaving  the phase not to use unpopulated.

    Sorry for my misleading reply before.

    Regards,

    Na