I would like tune my gate driver circuit with marked components. I couldn't find resource for calculation about them. Could you please send me some application notes ?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
I think this document will be the most useful for you. It goes over how to pick the gate resistor to ensure it is critically damped. As for the antiparallel diode and resistor, it is to allow separate control of turn-on and turn off times. See section 3.4.1 of this document.
Hopefully these work for you. Let me know if you have any more questions.