• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 64 subscribers
  • Views 94 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM3243: Whether ACB characteristics described in datasheet will affect the stability of output voltage

yanggang5
Prodigy 110 points
Part Number: LM3243

Hi Team

As described in the datasheet, the ACB characteristic will provide additional output current at the rising and falling edges of the output.

But this output path is not stabilized by inductance, so this additional jump current is directly added to the output terminal, whether it will cause output instability？

Best,

yanggang

  • 0
    TI__Expert 8756 points

    Hello,

    I apologize for the delay. This website was on maintenance for last couple of days, so, we could not reply to this thread.

    I will respond to you by later today.

    Thanks!

    Best regards

    Sneha 

  • 0 in reply to Sneha
    TI__Expert 8756 points

    Hello,

    To my knowledge, I do not think the ACB feature will cause any instability in the output as it has been designed in a way to maintain output voltage regulations with minimum ripple during operation. I hope this helps.

    Thanks!

    Best regards

    Sneha