Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

  • State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 64 subscribers
  • Views 108 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ24105-Q1: Maximum and minimum values of tDISCHRG1 and tWAKE

?? ??
Prodigy 10 points
Part Number: BQ24105-Q1

I am trying to detect battery voltage to confirm that the battery is disconnected, but the Battery Detect sequence starts and I cannot detect it correctly.

I would like to know the maximum and minimum values of tDISCHRG1 and tWAKE, which are written in the datasheet Figure 8: Battery Detect Timing Diagram.

Best regards

kuno

  • 0
    TI__Guru**** 152346 points

    Hi Kuno,

    Unfortunately, I don't have those values.  From past experience with similar devices, timing parameters can vary by as much a 30% for non-automotive grade devices.  For automotive temperature range, I recommend using +/-40%.

    Regards,

    Jeff