• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 153 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM5039: Do we have LM5039 frequency response EXCEL file ?

Kygo Cheng
Expert 6830 points
Part Number: LM5039

Hi Team

Do we have the LM5039 frequency response design tool ?

Now we want to checking the design of  LM5039 is good or not , and would like to checking frequency response too!

  • 0
    TI__Expert 7900 points

    Hello Kygo,

    I'm sorry, I do not see the file your need.  Design tools, if we have any, would be on the LM5039 Home Page.

    I would start with the Loop Calculator in Power Stage Designer.

    First select the topology:  Half Bridge

    Next enter the design targets:  Vin, Vout, Iout, switching frequency, ripple current, maximum duty cycle, etc.

    Then choose actual values but note the recommended values too.

    Finally, at the top of the page select Loop Calculator

    It may take some time to become familiar but this is a good starting point.

    The INFO button on the loop calculator has some important tips.

    If this is not adequate I would try Webench next.

    Regards,

    Eric