This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPSM63602: Connection of VCC pin

Part Number: TPSM63602

Hi team,

On the datasheet 8.3.10 it states that VCC should be connected to AGND as below.

However, on Fig. 9-1, the VCC is connected to PGND as shown below.

Should VCC be connected to the AGND or PGND?

Best Regards,

Kei Kuwahara