TPS65218D0: Software Resouces

Hi Ray, 

In terms of software for the TPS65218D0 we provide the IP-GUI tool and BoostXL-TPS65218 to assist with programming during the development stage. Both of these can be found on the TPS65218 product page linked here: TPS65218D0 data sheet, product information and support | TI.com 

Linked below is documentation on utilizing the BoostXL-TPS65218 with IP-GUI to access the I2C registers on the device. 

BOOSTXL-TPS65218 EVM User's Guide (ti.com) 

There is also an I2C operation section (page 45), programming section (page 48), and Register Maps (page 50) located in the TPS65218D0 datasheet. 

Regards,

Garrett

Hi Ray, 

In addition to the information that Garrett provided, here is also the link to the TPS65218D0 PMIC drivers:

https://www.ti.com/tool/TPS65218SW-LINUX?keyMatch=TPS65218

Thanks,

Brenda

Hi Ray, 

I have confirmed with our teams software expert that we do not have additional resources beyond what has been shared. He provided me a link to a GitHub with the Linux driver for TPS65218D0 (linked below), but this source file is one of the files linked on the tool on TI.com Brenda provided last week. 

https://github.com/torvalds/linux/blob/master/drivers/mfd/tps65218.c 

I will also attach what I believe is a relevant past thread below where a customer was inquiring about programming the TPS65218D0 EEPROM and using the uBoot command line.

https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/903878/tps65218d0-programming-power-up-default-values-in-eeprom 

Best Regards,

Garrett