Hi team,
Our customer plan to use this device and have some question in User's Guide(www.ti.com/.../sluubf6.pdf).
1. In 4.2 Equipment and EVM Setup, there are the resister R11 and test point TP9 on the description, but in Figure1 and Figure2 these parts is nothing.
What is R11?
2. In figure1, Li-ion is connected to J2 but J2 is connected GND only. It seems that Li-ion is shorted. Is this correct?
3. We recognize R7 is the resister to control TS voltage. Is this correct?
best regards,
teritama
