Hi,
We are simulating TPS54623 DC-DC converter in power bench, we are not getting start up simulation results.
Attaching the snip for the reference.
We are performing conversions of 12V-3.3V, 12V-5V, 12V-1.5V, 12V-1.1V.
Kindly help us in resolving the issue.
Thanks
S Sathya shree
Hi Sathya,
I have attempted to run the Startup simulation from my side with the same conditions as the screenshot (12Vin, 1.1Vout, Iout=6A) and had no issues.
You can open the working startup webench I used through this link: https://webench.ti.com/appinfo/webench/scripts/SDP.cgi?ID=ECED35764396D944
Regards,
Eileen
