This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS7H5001-SP: Pulse width of OUTA/OUTB at 50% or off

Part Number: TPS7H5001-SP
Other Parts Discussed in Thread: PSPICE-FOR-TI

Hi all

I had a running simulation in Pspice for TI on the 9th of November 2022, today (14th of November 2022) the same circuit behaves quite different and I run constantly into convergence problems. It looks like the pulsewidth of OUTA and OUTB can only be 50% (max) or the signals stay low. 

A new version of the Pspice transient model has been released (SLVMDN1B.ZIP). In all the examples (Buck, Flyback, PushPull) the pulsewidth is 50% or off. Pulseskipping is visible, but the pulsewidth is not varying. 

Can you please verify my findings? Or did I miss something concerning the behaviour of the part?

Best regards

Martin