• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 62 subscribers
  • Views 122 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS566238: Review

d_zero
Genius 4430 points
Part Number: TPS566238

Dear All,

we decided to design in TPS566238PRQF for 0.8V ,1.1V and 1.8V rail.

1)

Pleas can you check our attached schematic reading selected inductor and input/output capacitors?

2)

Can you tell for 0.8V version, if we have at the load ( CPU) additional 2x 47uF_6.3V_X5R_0805 caps for decupling + 1x bulk polymer tantalum 150uF ( 6TPS150MUD) .

Do you see any problem with configuration, regarding max output capacitance?

Best Regards,

D.

  • 0
    TI__Genius 14757 points

    Hello Zero,

    Our datasheet Table 8-2 gives the recommended LC values.

    Using lower inductance could get better transient performance, you may use 1uH for 0.8V & 1.1V rails instead of 1.5uH.

    The table also lists the maximum Cout recommendation, please take a look.