Other Parts Discussed in Thread: BQSTUDIO
Hello Team ,
We are using the 3 cell setup and have the cell type US18650VTC5A , we flashed the chemid to our board with the suppport of BQstudio (2161 is the chemid).
I saw the terminal volatge set as 8.9V , but the battery shows it have 10.2 V , but the percentage of charging shows as 0 percentage.
Terminate Voltage, this is essentially the empty pack voltage where the gauge should ensure 0% state of charge is reported.
why this chnage is occured in battery , if battery have the remaining voltage , why it is shown as 0 %.
i tested with 0x0E and 0x0F command both returns 0 value.
Could you please help me why this issue is happend , venthough battery have sufficient voltage.3365.export.gg.csv