Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

  • State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 64 subscribers
  • Views 167 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ24105: Charge complete assertion

ACGUY
Guru 11170 points
Part Number: BQ24105

Hello E2E,

 I from ”">e2e.ti.com/.../bq24105-charge-complete-assertion"

I posted thread has not reply not yet in a few days ago.
Therefore, I posted again.

Please let me know about conditions for assertion to charge complete.
Only when the battery voltage reaches Vbat?
If the safety timer times out while charging, is the device indicates any status?

Regards,
ACGUY