Hi Experts,
Seeking your assistance on this query:
We are using the standard voltage supervisor (TPS37042A3OFDDFRQ1). The part number indicates that this IC is Open Drain - Active Low. According to the datasheet, the nominal monitored power supply voltages for SENSE1 and SENSE 2 are 3.3V and 1.2V, respectively.
In the circuit of question, VDD is at 3.3V, SENSE1 is connected to 3.3V, and SENSE2 is connected to 1.2V. We are expecting the output to be "HIGH". However, the output is measured to be "LOW" although the sensed voltages are withing their normal operation. We used a few parts and their output remains LOW.
I have attached the schematic. Can you please assist us in this matter?
Thank you.
Regards,
Archie A.