TPS536C9: Online Programming

Allen yang

Intellectual 310 points

Part Number: TPS536C9

Hi Expert,

Does TPS536C9 have online programming function from BMC ?

Please provide Programming Guide

Regards,

Allen

over 1 year ago

+1 Travis Williams over 1 year ago

TI__Expert 8960 points

Hi Allen,

Online programming is when you create the config file with a TPS536C9 connected to Fusion using a USB-to-GPIO adapter. It is required to have a physical device connected in order to create correct NVM data.

I do not have a programming guide for this device available, but here's some material on a similar device:

Loop compensation: https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1109418/tps536c7-loop-compensation-parameters-to-improve-phase-margin-in-fusion_digital_power_designer

The most important values to program in Fusion are going to be under the "rail configuration" and "protection" tabs.

Thanks,

Travis

Power management

Power management forum

TPS536C9: Online Programming