My customer asked a question, please help answer it, thank you.
GB 9706.1 General Requirements for Basic Safety and Basic Performance of Medical Electrical Equipment
This standard requires that the input Vin shall be short circuited to the ground, and the low-voltage level of output vout or gnd shall be above 1KV. Previously, it was 500V, and the new standard was raised to 1000V.
My customer want to know whether the TPS55010 meets the above requirements? If this chip is not suitable, can you help to recommend chips that meet the requirements.
V in is actually 3V to 4.5V, output 3.3V, I out ≥ 200ma, boost/buck voltage rise/drop mode.