Because of the holidays, TI E2E™ design support forum responses will be delayed from Dec. 25 through Jan. 2. Thank you for your patience.

  • State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 64 subscribers
  • Views 190 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

UCC27517: can you provide IBIS model ?

UCC27517: PSPICE model

NY
Expert 3040 points
Part Number: UCC27517

Hi team, 

Customer is skeptical of justification that PSPICE of this device, because the output structure is diffrent with Figure23 in datasheet.

Datasheet is  Pch / Nch parallel opeation however, PSPICE model is only driven by Pch. Can we realize realistic simuation with existing PSPICE?

  • 0
    TI__Genius 11770 points

    Hi NY,

    It is true that the PSpice model is limited in that way. It depends on how the customer is using the driver. If they use it to do gate drive, there will be very little difference between the model and reality. Maybe if they are driving an IGBT or SiC with a high miller plateau, or If they are doing something that stresses the PMOS more, like driving DC loads, then the model will not be very accurate.  

    It may be possible to adjust the behavior closer to the parallel operation by making a voltage-controlled resistor on the output. A CCVS may also work. 

    Thanks,

    Alex M.