UCC3895: USING EXTERNAL OSCILLATOR FOR SYNC INPUT

Rossano Valsecchi

Part Number: UCC3895
Other Parts Discussed in Thread: UCC2895

Hello

for a new design I'd like to drive the SYNC pin of UCC 2895 with an external clock signal. Reading the data sheet I don't understand what I have to do with pins Rt and Ct.

Can someone give me some help, please?

Regards

over 1 year ago

0 Mike O' over 1 year ago

TI__Guru 72565 points

Hello,

I am looking into your inquiry and will get back to you shortly.

Regards,

0 Mike O' over 1 year ago in reply to Mike O'

TI__Guru 72565 points

Hello,

If the UCC2895 is in slave mode. You should program the Rt and Ct so the sync frequency is 80% of the sync frequency. Even when you are synchronizing the UCC2895 as a slave it needs to have Ct and Rt populated.

Regards,

0 Rossano Valsecchi over 1 year ago in reply to Mike O'

Prodigy 240 points

Thank you

Power management

Power management forum

UCC3895: USING EXTERNAL OSCILLATOR FOR SYNC INPUT