Hi team,
100kΩ is recommended for Rent, but 100kΩ is used for Renb in the circuit example.
Is it a typo?
Best Regards,
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi team,
100kΩ is recommended for Rent, but 100kΩ is used for Renb in the circuit example.
Is it a typo?
Best Regards,
Hi Kobaya-san,
High resistances on the enable divider are only required to keep the current consumption low. If you use 100k for either the upper or lower resistor, you should be fine.
Regards,
Tim