LM4132: No connect pin 1

Mike Havey

Prodigy 70 points

Part Number: LM4132
Other Parts Discussed in Thread: REF4132

Pin 1 of the LM4132 is labeled 'no connect pin'. Is it a problem if I connect the pin to FND?

over 1 year ago

0 Mike Havey over 1 year ago

Prodigy 70 points

Sorry ... I meant GND

0 Trailokya Rai over 1 year ago in reply to Mike Havey

TI__Genius 11321 points

Hi Mike

It is recommended to leave the pin floating.

Regards

Trailokya

0 Mike Havey over 1 year ago in reply to Trailokya Rai

Prodigy 70 points

Is that because it's connected internally? I would like to connect pin 1 to GND so that the land pattern would be compatible with an alternate part.

0 Trailokya Rai over 1 year ago in reply to Mike Havey

TI__Genius 11321 points

Hi Mike

I'd suggest to use REF4132. You can connect pin 1 to GND. It is pin compatible with LM4132 and it is our new gen part and will have better supply in future.

Regards

Trailokya

Because of the holidays, TI E2E™ design support forum responses will be delayed from Dec. 25 through Jan. 2. Thank you for your patience.

Power management

Power management forum

LM4132: No connect pin 1