This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

UCD90120: UCD90120 not getting detected in I2C by Fusion GUI

Part Number: UCD90120

Hi, I have attached the schematic of the UCD90120. The nTRST pin is pulled low through a wire. The nRESET goes high after 3.3V power after more than 2uS. The UCD90120 U76 is not getting detected on Fusion Design online GUI.

We are using this part since it was available in market.

Can you please help. 

Thanks, AbhijitB0EVB_Seq.pdf