Hello can you tell me if the minimum output capacitor value given on the quickstart is the value after MLCC derating or before?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello can you tell me if the minimum output capacitor value given on the quickstart is the value after MLCC derating or before?
Hi Genny,
the value in the quickstart calculator is the effective value of the capacitor. So you need to have in your hardware a higher capacitor with considering the DC Bias derating.
In the quickstart calculator you have to enter the derated value.
Best regards,
Stefan