This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

UCD90120: Latest TI-Fusion-Digital-Power-Designer-7.7.1 is not working with UCD90120

Part Number: UCD90120


 Which Fusion GUI and USB driver to the USB Interface Adapter will work with the UCD90120?

With 7.7.1, GPIO1 is not pulling high. With TI-Fusion-Digital-Power-Designer-2.0.179, GPIO1 is being pulled high. I am programming the NVRAM of the UCD90120 in both cases.

This is repeating with some other GPIOs as well.

thanks, Abhijit