This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS548A28: R4 in the Figure 8-1

Part Number: TPS548A28


What is the R4 in datasheet Figure 8-1 for?
Is the R4 really required?

Best regards,



    R4 is a series connection resistor between the VSNS- "negative remote sense" pin and the ground at the output of the converter.  It is there to separate the VSNS- net from the ground net to ensure remote sense of the ground at the output.  While not strictly required by the circuit, it ensures the remote sense ground line is not accidentally shorted to the ground plane at some other point, compromising the accuracy of the remote sense.