This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM5170EVM-BIDIR: LM5170-Q1-UVLO SETTINGS

Part Number: LM5170EVM-BIDIR

Hello

I have a confusion regarding startup of EVM board, I am working on boost mode 24/48. If I installed the R4 = 100kohm, so do I need to connect the external supply to J17 PIN 5 EN? Because as per my understanding R4 resistor pulls up UVLO to start the board if voltage supply is given at LV 12V port.

Thanks