• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 238 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS25810A-Q1: CC1 and CC2 line length

Shinji Tsuji
Genius 14179 points
Part Number: TPS25810A-Q1
Other Parts Discussed in Thread: PMP40286

Hi team,

I have a question about CC line layout recommendation below. 

"Keep the CC lines close to the same length."

What is the purpose of controlling the length of each CC lines? 

If there is a need to keep it same length, could you give me the max tolerance?

regards,

  • 0
    TI__Mastermind 18556 points

    Hi Tsuji-san,

    Actually we don't have this specific data, but I measure our reference design PMP40286, and their length are the 255.534mil(CC1), 547.526mil(CC2), so I guess about 300mil difference is ok.

    PMP40286.zip

    And I also attached the layout document here, you can refer to it.

    Best Regards,

    Kuno