Hi,
Is it possible to implement current Doubler configuration (CDR) on secondary side using UCC28951?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
Is it possible to implement current Doubler configuration (CDR) on secondary side using UCC28951?
Hi Vineesh,
Thank you for the query on UCC28951.
You should be able to use it in current doubler configuration. The following app note shows example of implementation
https://www.ti.com/seclit/ml/slup111/slup111.pdf
https://www.ti.com/lit/an/slua121/slua121.pdf
Regards,
Harish