LM5160DNTBK-CALC: Help to review the schematic design of LM5160DNTBK-CALC and give some suggestions

xiaofu wen

Expert 2455 points

Part Number: LM5160DNTBK-CALC

Help to review the schematic design of LM5160DNTBK-CALC and give some suggestions

LM5160DNT.pdf

over 1 year ago

0 Hongjia-Wu over 1 year ago

TI__Expert 5280 points

Hi,

From the schematic you showed, the transformer ratio is 2:1 and you want both Vpri and Vsec to be 12V which conflicts. Please confirm and send us a complete flybuck calculation tool and we can check the settings accordingly.

https://www.ti.com/tool/LM5160DNTFBK-CALC

Regards,

Hongjia

0 Hongjia-Wu over 1 year ago

TI__Expert 5280 points

Hi,

As there is no reply, I will close this thread. If there are any questions later, feel free to comment.

Regards,

Hongjia

Power management

Power management forum

LM5160DNTBK-CALC: Help to review the schematic design of LM5160DNTBK-CALC and give some suggestions